DESCRIPTION
This product is a ready-to-clean organic acid bowl cleaner that uses a patented organic acid that is more effective than phosphoric acid when removing limestone, hard water deposits, rust, soap scum, and urinary salts from hard surfaces. Can be used to clean and deodorize washbasins, bathtubs, shower stalls, drinking fountains, toilet bowls, urinals, and sinks. Its clinging formula controls run-off for effective usage. Contains no phosphates, has very low VOC, and is non-fuming and non-corrosive to the skin and mild steel. The product is classified as a DOT non-regulated material for US ground shipments.

DIRECTIONS
TOILET BOWLS: Remove water by forcing it over the trap with the swab mop. Saturate the swab with the cleaner and wet all surfaces thoroughly. It is most important to swab under the rim of the bowl to clean water outlets. Allow the cleaner to remain for at least 10 minutes until all rust, scale, and stains are loosened. Rinse by flushing.

URINALS: Place a clean mop over the trap in the urinal and saturate with bowl cleaner. Swab the urinal thoroughly. Remove the screen at the urinal trap and pour approximately 6 to 8 ounces of concentrate into and around the drain opening. Allow to soak a few minutes. Replace the screen and flush well.

TILE, WASHSTANDS, SHOWERS, FIBERGLASS, STAINLESS STEEL: Always dilute the product by adding 1 quart of product per gallon of water. Using a swab mop, sponge, brush, or cloth; apply to wet all surfaces thoroughly. Rinse thoroughly with clear water after several minutes.

Do not use it on any surface, such as marble, that can be damaged by acidic materials. Many surfaces are not resistant to acid.